Ozarks Jeep Thing Club
Public Forums => Fabricators Forum => Topic started by: LibertyPatriot on 04/ 1/08 - 02:44PM
-
Does anyone work at a shop or have a lathe that can turn down some bolts to look like these? I think the bolt is 1-1/8". There is a narrow shank right at the bolt head, so I'll have to get them threaded down too.
-
Yes
-
I got more info. It's a 7/8" bolt turned down to 5/8". Would also need a die to thread down within 1/16" of the bolt head. Thread is 14 TPI. Bolt length is 2-1/4".
-
yes