This is the sketch I made for the main frame we'll be working from. **These are the tires off my Jeep. 33" Cooper Discoverers
**Tires/wheels mounted on the Dexter Torflex Axle
**Here is the pile of aluminum stock I am working from. All of the frame is 2X3" tubing 1/4" Thick
**We decided to miter the corners to make them stronger
**We used a miter saw with a special blade to cut all of the aluminum stock
**A fair amount of time was spent making sure the frame was perfectly square
**We welded all of the joints using a MIG welder with an aluminum spool gun
**Once we got going, the frame assembled pretty quickly. 4 Hours from the pile to a rolling chassis!