well I had plans to come to the meeting Thursday night, but got sidetracked. Did this Thursday night, painted it up last night.
Welding on the floor is a real drag.. the drivers side fender I welded entirely on the floor, I have the passenger side all tacked up and ready to weld; but was not looking forward to doing it on the floor, so I took a little detour.
I cut my frame top and bottom frame pieces (1x1x1/8) and legs (1.25x1.25x1/8); I also mitered them at 45degrees
marked out my top and bottom shelf on some 3/16" I have; then cut out with my orbital saw (wish I had a plasma the whole time)
added wheels to the bottom, painted everything but the top.
Can't take credit for the design of this table I found a PDF online that I went by. Only thing I did different was I used 3/16 instead of 1/8 for my shelves... Its what I had laying around. Also I place the mig gun holder below the tabletop's horizon so it wasn't in the way when I'm moving parts around on the table top.
I've attached the PDF to this post if anyone wants it. Nice table, not too big, not too small. I'll probably make up a basket of some sort to add to the bottom shelve for smaller accessories.