Anyone running a Dana 300 and a 700R4 ??

[ford381stroker]

I was just curious if anyone is currently running a 700R4 mated to a Dana 300.  I picked up a rig running a Dana 60 front with the setup mentioned above.  It came without driveshafts and I am wondering if anyone is running this setup. If so, can you poste some pics.  I spent some time under mine today and I just don't see how the driveshaft can clear the tranny pan and go to the axle.  I imagine the driveshaft will look pretty odd.

Thanks for looking.

[YJ_Aaron]

Most people run like an 1.25" OD front shaft. 

[OJTV8CJ]

Ask Kyle as that is the same setup that he is running.  1.25 tubing is the shaft of choice.  Call John's and talk to Brandon.  It is a very popular swap and I bet that John has made a couple hundred if not more of those shafts.

[ford381stroker]

Is it 1 1/4" solid drive shaft?  Will it be able to handle 44's?  If I need to change to a different transmission I will.  Thanks for the help thus far. 

[YJ_Aaron]

1.25" 3/8 wall I think is what Johns makes.  Everything breaks but Kyle is running 42's, and I'm certain his V8 and jeep outpowers and outweighs Eriks old Sami.

[ford381stroker]

Cool.  I will have to give them a call some time this week.