Home
Help
Calendar
Login
Register
Ozarks Jeep Thing Club
»
Public Forums
»
Technical Forum
»
My 30's coming together...
« previous
next »
Print
Pages: [
1
] |
Go Down
Author
Topic: My 30's coming together... (Read 1254 times)
FlameRed08
Level 3
Posts: 316
My 30's coming together...
«
on:
04/12/09 - 03:05AM »
After bending the front 30, I decided that was not going to happen with the one I am putting back in. While it is (unfortunately) still going to be a 30, it should be a nice upgrade. It has 4.88's, ARB's, and has been built up with a sleeve on the inside of the axle tubes, a truss on the long side, and gussets on the C's. One of my buddies did the welding, and here are a few photos of my busy day...
Logged
2008 JK Unlimited X, Flame Red, 4" Superlift, Shrockworks Rails, Elements doors, etc.
map93heep
Level 3
Posts: 267
Re: My 30's coming together...
«
Reply #1 on:
04/12/09 - 10:47AM »
looks good Ross, I don't think you will have to worry about bend it now.
Logged
YJ_Aaron
Level 5
Posts: 4255
Jeep @ Disney
Re: My 30's coming together...
«
Reply #2 on:
04/12/09 - 01:19PM »
Looks like a lot of the sleeve sticking out... have you put the shaft & outers on to see if it will clearn? Normally the machined part of the yoke rests against the inside of the tube.
Nice work, that is one polished t... i mean 30!
Logged
Is it possible for a jeep to ever truely be finished?<br /><br />Only the dead have seen the end of war---Plato
FlameRed08
Level 3
Posts: 316
Re: My 30's coming together...
«
Reply #3 on:
04/12/09 - 05:17PM »
Yeah... it sticksout just far enough for a needle grease zerk. I haven't fit the axle yet but it looks loke it should fit OK.
and yes... it's still a polished turd... just highly polished.
Logged
2008 JK Unlimited X, Flame Red, 4" Superlift, Shrockworks Rails, Elements doors, etc.
Big A
Level 3
Posts: 265
Re: My 30's coming together...
«
Reply #4 on:
04/13/09 - 04:43AM »
Very nice!
I really should get mine done before i bend it... If it's not already bent.
Logged
˙ɹǝʌo ǝɯ dıןɟ sıɥʇ pɐǝɹ uɐɔ noʎ ɟı
FlameRed08
Level 3
Posts: 316
Re: My 30's coming together...
«
Reply #5 on:
04/18/09 - 02:03PM »
I finally got around to putting them in this week. The 4.88's make a world of difference, and all I have left to do is get a compressor and hook up the ARB's. That... and tune my CB!
Logged
2008 JK Unlimited X, Flame Red, 4" Superlift, Shrockworks Rails, Elements doors, etc.
YJ_Aaron
Level 5
Posts: 4255
Jeep @ Disney
Re: My 30's coming together...
«
Reply #6 on:
04/18/09 - 02:58PM »
Ross which compressor are you wanting, going with an ARB or something else?
Logged
Is it possible for a jeep to ever truely be finished?<br /><br />Only the dead have seen the end of war---Plato
FlameRed08
Level 3
Posts: 316
Re: My 30's coming together...
«
Reply #7 on:
04/18/09 - 04:11PM »
After talking with enough of you guys, I think I have settled on a Viair setup.
Logged
2008 JK Unlimited X, Flame Red, 4" Superlift, Shrockworks Rails, Elements doors, etc.
Print
Pages: [
1
] |
Go Up
« previous
next »
Ozarks Jeep Thing Club
»
Public Forums
»
Technical Forum
»
My 30's coming together...