Ozarks Jeep Thing Club

Public Forums => Fabricators Forum => Topic started by: redneck_punk on 10/12/06 - 10:31AM

Title: Needing redneck wheel spacers
Post by: redneck_punk on 10/12/06 - 10:31AM

any one know of a way to make some redneck wheel spacers I have some rubbing at full turn with the 31s on

Title: Re: Needing redneck spacers
Post by: LibertyPatriot on 10/12/06 - 10:49AM

What's it rubbing on?  Swaybar, fender or just some plastic in the wheel well?  Are you talking about wheel spacers?

I think someone needs a sawsall for Xmas  :brows:

Title: Re: Needing redneck spacers
Post by: YJ_Aaron on 10/12/06 - 10:53AM

Unless its' rubbing on something that can't be slimmed down like control arms I say cut to clear.

If you actually need wheelspacers look in the yellowTJ lift thread ISO posted a link to some.

Title: Re: Needing redneck spacers
Post by: redneck_punk on 10/12/06 - 12:13PM

wheel spacers I can rubbing on the lower controle arms

Title: Re: Needing redneck wheel spacers
Post by: OJTV8CJ on 10/12/06 - 01:47PM

You will end up rubbing on the fender then.   Then you will have a reason to trim the fronts tho.

Title: Re: Needing redneck wheel spacers
Post by: redneck_punk on 10/12/06 - 02:02PM

I would rather trim the fender than trim the controle arms (not that I would)    I just need a better excuse to trim the finders than oops I have a small dent