« previous next »
Pages: [1] |   Go Down

Author Topic: Axles  (Read 2221 times)

Offline xj42

  • Level 3
  • ***
  • Posts: 293
Axles
« on: 10/21/09 - 12:57AM »
I have a few axles taking up space in the wife's flower bed and they need to go.
One passenger drop 44 from a Cherokee.  I have the shafts, knuckles, spindles, caliper brackets, hubs, and misc steering linkage.

One passenger drop 44 from a wide track Cherokee.  I have the shafts, knuckles, spindles, caliper brackets, hubs, and misc steering linkage.
I don't have any flat top knuckles and the spindles are the big bearing type.  No calipers or rotors.  I do have a series 3 carrier for each too.  I would like $75 for each, but if you just need certain parts I'll sell those too.

One complete LP Dana 30 3.55 gears from an XJ.  Willing to sell whole or part out.
Logged

Offline JollyRoger

  • Level 1
  • *
  • Posts: 46
Re: Axles
« Reply #1 on: 12/ 5/09 - 11:14AM »
If you still have these for sale could you tell me the length of the pass drop axle wms to wms.  Thank you.
Logged

Offline xj42

  • Level 3
  • ***
  • Posts: 293
Re: Axles
« Reply #2 on: 12/ 5/09 - 02:32PM »
I do still have them.  While I don't have exact measurements I've found several online.
The narrow one should be about 60.5" and the wide one should be about 65".
Logged

Offline JollyRoger

  • Level 1
  • *
  • Posts: 46
Re: Axles
« Reply #3 on: 12/ 5/09 - 05:37PM »
Sorry, I mis-read the original post.  Looks like both are passenger drop, which is good.  I would be interested in the shorter of the two.  What is the lug pattern on that axle?  I would need 5 x 5.5.  did it have disc brakes originally?  If so does it still have the brackets and such?  You can give me a call if that would be easier.  818-3369
Logged

Offline xj42

  • Level 3
  • ***
  • Posts: 293
Re: Axles
« Reply #4 on: 12/ 5/09 - 06:02PM »
Here is some info on converting to 5 lug.
http://www.jeepgod.net/d44625.html
Logged

Offline xj42

  • Level 3
  • ***
  • Posts: 293
Re: Axles
« Reply #5 on: 03/21/10 - 11:39PM »
The 30 is gone, but I still have the shafts with unit bearings.  May have a buyer for those though.
Logged

Offline YJ_Aaron

  • Level 5
  • *****
  • Posts: 4255
  • Jeep @ Disney
Re: Axles
« Reply #6 on: 03/21/10 - 11:47PM »
I bet your neighbors love you Austin.
Logged
Is it possible for a jeep to ever truely be finished?<br /><br />Only the dead have seen the end of war---Plato

Offline xj42

  • Level 3
  • ***
  • Posts: 293
Re: Axles
« Reply #7 on: 03/21/10 - 11:49PM »
I had to drag them to the side of the house.  I'm trying to sell this place.
Logged

Offline YJ_Aaron

  • Level 5
  • *****
  • Posts: 4255
  • Jeep @ Disney
Re: Axles
« Reply #8 on: 03/21/10 - 11:49PM »
Nice. 
Logged
Is it possible for a jeep to ever truely be finished?<br /><br />Only the dead have seen the end of war---Plato

Offline Jeeper guy

  • Level 3
  • ***
  • Posts: 332
  • OINK
Re: Axles
« Reply #9 on: 03/22/10 - 01:09AM »
yes you still have a buyer. Can I stop by tomorrow afternoon or night?
Logged
First you crawl, then you walk, then you drive, then you crawl again....

Offline goldswim5

  • Level 2
  • **
  • Posts: 112
Re: Axles
« Reply #10 on: 03/22/10 - 02:08AM »
Do you still have the shafts or the unit bearings?
Logged

Offline xj42

  • Level 3
  • ***
  • Posts: 293
Re: Axles
« Reply #11 on: 03/22/10 - 10:33AM »
Quote from: Jeeper guy on 03/22/10 - 01:09AM
yes you still have a buyer. Can I stop by tomorrow afternoon or night?

PM sent.

Quote from: goldswim5 on 03/22/10 - 02:08AM
Do you still have the shafts or the unit bearings?

Next in line.
Logged
Pages: [1] |   Go Up
« previous next »