Home
Help
Calendar
Login
Register
Ozarks Jeep Thing Club
»
Public Forums
»
Technical Forum
»
4x4 wont go in
« previous
next »
Print
Pages: [
1
] |
Go Down
Author
Topic: 4x4 wont go in (Read 1539 times)
drock1970
Level 1
Posts: 12
4x4 wont go in
«
on:
02/10/11 - 07:18PM »
:102:i have a 1988 wrangler and i was driving it today and i had to shift in in and out of 4x4 a few times and it did fine. It will not go in to 4 hi or 4 lo. It drives fine in 2 wheel dr. The 4x4 light on my dash is on all the time now. mechanically it seems fine (it will shift in and out but wont engage) What is going on!!!!!!!!!!
Logged
CRAZY LARRY
Charter Members
Level 3
Posts: 466
Re: 4x4 wont go in
«
Reply #1 on:
02/10/11 - 07:37PM »
sound like a vac. line is off or leaking
Logged
Zombie brains; smells like fish taste like chicken.
drock1970
Level 1
Posts: 12
Re: 4x4 wont go in
«
Reply #2 on:
02/10/11 - 11:29PM »
Thanks, I'll do some investigating on that and let you know if that was it...
Logged
YJ_Aaron
Level 5
Posts: 4255
Jeep @ Disney
Re: 4x4 wont go in
«
Reply #3 on:
02/12/11 - 01:43PM »
Check vacuum at the front differential. Most likely it or the 4 port plug on the top front of your transfercase is the culprit.
Logged
Is it possible for a jeep to ever truely be finished?<br /><br />Only the dead have seen the end of war---Plato
militarytj
Level 1
Posts: 23
Re: 4x4 wont go in
«
Reply #4 on:
03/16/11 - 12:42AM »
where does the front diff. tube go? mine is just hanging up on the radiator, this jeep is in some bad shape.
Logged
drock1970
Level 1
Posts: 12
Re: 4x4 wont go in
«
Reply #5 on:
03/16/11 - 10:39AM »
It's on the top, if your under the rig, look about where the floor panel for the gear shifts are, it will be just to the front of that directly on top.
Logged
drock1970
Level 1
Posts: 12
Re: 4x4 wont go in
«
Reply #6 on:
03/16/11 - 10:42AM »
You should have 4 tubes coming out of that cap looking thing that I pointed out. As far as where the other end goes, spend $20 or so and get you a chiltons manual, just be sure it has the vacuum diagrams in it cuz some don't.
Logged
militarytj
Level 1
Posts: 23
Re: 4x4 wont go in
«
Reply #7 on:
03/16/11 - 10:51AM »
ya I got a chilton's manual..... but I much rather hear and read from (( experienced )) jeep owners, makes for piece of mind Ha Ha
Logged
YJ_Aaron
Level 5
Posts: 4255
Jeep @ Disney
Re: 4x4 wont go in
«
Reply #8 on:
03/16/11 - 06:21PM »
Depends on which tube you are asking about on the front diff. If you mean the one that comes off the third member it should run up your core support on the D.S. of the radiator and clip on. That's just the vent tube.
If you are referring to your vacuum that engages your disconnect (on pass side just inboard of leaf spring) it should run to xcase.
Logged
Is it possible for a jeep to ever truely be finished?<br /><br />Only the dead have seen the end of war---Plato
militarytj
Level 1
Posts: 23
Re: 4x4 wont go in
«
Reply #9 on:
03/16/11 - 07:04PM »
Ya, it's the vent tube...gotta be. Thanks brother.
it's just hanging there tho. it's a new radiator in it.
Logged
Print
Pages: [
1
] |
Go Up
« previous
next »
Ozarks Jeep Thing Club
»
Public Forums
»
Technical Forum
»
4x4 wont go in