Rubicon Ring and Pinions Question

[LoneWolf]

I've got the 410 ring and pinions that came out of my Rubicon when I upgraded to 4.88's.

My question is... Will they fit in anything besides a Rubicon?

[LibertyPatriot]

If they do, I need your rear ring and pinion for my 86 CJ D44 axle.

But from Quadratec's site, it looks like they are different.

[YJ_Aaron]

From what I've always been told they do not fit other 44s.  They are a different thickness than standard 44 gears.

[iJeep]

Yes, they will work.  They are just a "thick" gear that has a little larger ring gear bolt than normal.

You will have to install them on a 3.73 and numerically lower carrier/locker and you will probably have to ream out the holes in the carrier/locker to 7/16 from 3/8".  Other than that they are just a normal Dana 44 standard cut ring and pinion.  The pinion shaft is the same as any others.

[LoneWolf]

Thanks guys... I appreciate the input.

FOR SALE

[LibertyPatriot]

So since my locker if for a 3.92:1 and up I guess they won't work for me.  Dang!