Ozarks Jeep Thing Club
Public Forums => Fabricators Forum => Topic started by: ford381stroker on 09/ 9/06 - 09:37PM
-
Here is the trailer I have. TanYJ is interested in it. If he purchases this trailer I will not mod it. If for some reason he doesn't, I would just like to do my research ahead of time.
Can I cut the rails off of the sides of this trailer and it still keep the same strength? I don't know if these kind of trailers need the rails to help support the trailer and keep it from tweaking.
I can't roll up on it with the 38's on the Toyota but I could if I could cut the rails off.
Any advice or wisdom would be greatly appreciated. Thanks.
(http://i61.photobucket.com/albums/h46/ford381stroker/FordHighboy.jpg)
-
(http://i61.photobucket.com/albums/h46/ford381stroker/FordHighboy2.jpg)
This is how close the truck is to fitting. The wheels are 14" wide but I am only lacking 2-3" clearance on each side of the trailer.
-
I would not cut the rail off. on that style of trailer they are part of the support. look at the frame bellow the wood. I bet you will find it is just angle. that is all you will have left to support the weight of you rig