Bumpers, Spare Carriers, and Tool Racks

[DBox]

Here's some pics of the stuff I'm building at this time. The bumpers can be made in differant lengths and with differant attatchments. The prices are for the bumpers as shown. They are made from 2X4X3/16 tubing with 2x3/8 pull points and a 2 inch reciever. Prices are $350 for bumper and tire carrier, $225 for bumper alone, and $175 for the carrier alone, which can be welded on most bumpers. The front bumper is similar without reciever. $175.  I also build the two tool carriers. The small one holds an axe and shove and the large one holds an axe, shovel, and hi-lift jack. They can be mounted on just about anything. Small $75, large $85 without tools. I'm located in Oxford, Ms and ship UPS Ground.

[imghttp://img.mypicgallery.com/dogtrax/dogtraxrearbumper-006_large.jpg][/img]



Dog Trax Fabrication, boxrange@aol.com, Phone 662-607-3500

[shamoo]

Will these items work on a TJ 98? If so i may be interrested in one and what is the lead time.


Shamoo

[DBox]

I'll have to find a TJ here to get the measurements for the mounts or you can send your measurements. I've got a front and rear that are partially finished that I could probably ship next week.

[shamoo]

i don't have a clue on measurements, if you could find out that would be better. Is this a 54" length bumper?


Shamoo

[DBox]

It's 57" but I have an unfinished one I can make what ever length you need. I'll find one here for measurements. Would you want a carrier too?