« previous next »
Pages: 1 2 [3] |   Go Down

Author Topic: engine starting Questions  (Read 3483 times)

Offline Jeeper guy

  • Level 3
  • ***
  • Posts: 332
  • OINK
Re: engine starting Questions
« Reply #30 on: 05/21/09 - 07:10PM »
nah, it wasnt the 02... i advanced the timing and it cleared all the sputtering. Also put my old oil sending unit on there and now my gauge is reading at 40ish at idle and goes to 60 when revved. I just need to get my temp down it runs at about 240-250?

This was the first time ive gotten to drive my jeep in 2 weeks it was a good feeling. :)

Alex
Logged
First you crawl, then you walk, then you drive, then you crawl again....

Offline Jeeper guy

  • Level 3
  • ***
  • Posts: 332
  • OINK
Re: engine starting Questions
« Reply #31 on: 06/ 1/09 - 04:32AM »
Update...

Well ive got about 200 miles on the new motor and shes still running hot around 230-240 and warms up quickly. Also the oil pressure will go up to 40-50 when just started or warming up then when warmed up it drops to like 15psi or around there, the past 50 miles it has acted like this. The idle is at 1000 at idle. Not sure if any of this should be a concern or not?

Alex
Logged
First you crawl, then you walk, then you drive, then you crawl again....
Pages: 1 2 [3] |   Go Up
« previous next »