« previous next »
Pages: [1] |   Go Down

Author Topic: GURU HELP  (Read 1028 times)

Offline forked horn

  • Level 1
  • *
  • Posts: 75
GURU HELP
« on: 08/ 4/06 - 10:25PM »
Carl I need help. How can I tell what trans. is in my jeep. It is a 78 cj 7 auto with quad trac. Also can i just change the transfer case and if so what kind do I need to get and where can i get one and what will it cost me?? Thanks DAvid
Logged
8 cj 7 SOA on 35 bfg muds

Offline OldYJ

  • Charter Members
  • Level 5
  • *
  • Posts: 1227
Re: GURU HELP
« Reply #1 on: 08/ 6/06 - 11:54PM »
you have a t400
 I think you can put a dana 300 behind it but you will need an adapter
Logged
"The democracy will cease to exist when you take away from
those who are willing to work and give to those who would not"
Thomas Jefferson

Offline GURU

  • Law Dog
  • Charter Members
  • Level 3
  • *
  • Posts: 385
Re: GURU HELP
« Reply #2 on: 08/ 8/06 - 07:41AM »
sorry dave, havent been on the boards in a few days.
Logged
hose who would give up essential liberty to purchase a little temporary safety deserve neither liberty nor safety.
                     -Benjamin Franklin
http://i47.photobucket.com/albums/f151/DDay1/biohazard.jpg
ZERO TOLERANCE

Offline forked horn

  • Level 1
  • *
  • Posts: 75
Re: GURU HELP
« Reply #3 on: 08/23/06 - 11:58AM »
carl is that correct about the 300. I would like to get rid of the quad. and the 300 is a tuff case.
Logged
8 cj 7 SOA on 35 bfg muds

Offline OJTV8CJ

  • Charter Members
  • Level 4
  • *
  • Posts: 843
Re: GURU HELP
« Reply #4 on: 08/23/06 - 12:01PM »
Forked - you can run a 300 behind your 400, but you will have to get the adaptor from John's.  It will also require you to get a new main shaft for your tranny to match the splines on the input of the 300.  I have mine in and it cost less than 250, which AA and Novak wanted twice that.
Logged
I cut sheetmetal for free.  It's fixing it that get's expensive.
Pages: [1] |   Go Up
« previous next »