Hey all.. My names Patrick and I got my 1st jeep in April, its an 89 Cherokee (amazing 4wd and a blast to play in). However, it needed alot of work when i got it(motor wise), I redid the vacuum, plugs & wires, map sensor and o2 sensor. But theres one thing that i just cant figure out, when it cool it runs great but when it gets to operating temp it wants to flood itself out, we bumped the idle so instead of flooding it idles higher and burns the excess fuel. We noticed that under the hood that the temp gauge had a plug missing from it and there are 2 wires cut near the firewall ( black/yellow and black/white i think) i think the 2 are connected,I just don't know what goes there though.... sorry for needing advice on my 1st post but its irritating me....thanks