Author Topic: Anyone with a press?  (Read 1233 times)

Offline goldswim5

  • Level 2
  • **
  • Posts: 112
Anyone with a press?
« on: 03/ 2/10 - 01:06AM »
I have two clevite bushings on my long arms I'm building that need to be pressed into their housings. Tried using a jeep and the ground to get them in to no avail. Would anyone be willing to press them in for me?

Offline Jeeper guy

  • Level 3
  • ***
  • Posts: 332
  • OINK
Re: Anyone with a press?
« Reply #1 on: 03/ 2/10 - 01:34AM »
harbor freight has display models that could be used.
First you crawl, then you walk, then you drive, then you crawl again....

Offline Mo Printer

  • Club Members
  • Level 3
  • *
  • Posts: 397
Re: Anyone with a press?
« Reply #2 on: 03/ 2/10 - 09:25AM »
Check with 'Mr. Safety' (aka Steve Moore) 866-6696
Mo Printer

Offline xj42

  • Level 3
  • ***
  • Posts: 293
Re: Anyone with a press?
« Reply #3 on: 03/ 2/10 - 03:04PM »
harbor freight has display models that could be used.

I laughed at this.

Offline FlameRed08

  • Level 3
  • ***
  • Posts: 316
Re: Anyone with a press?
« Reply #4 on: 03/ 2/10 - 03:12PM »
harbor freight has display models that could be used.

Like most harbor freight tools, the press is only good for one use so you will need to find two displays.  8)
2008 JK Unlimited X, Flame Red, 4" Superlift, Shrockworks Rails, Elements doors, etc.

Offline goldswim5

  • Level 2
  • **
  • Posts: 112
Re: Anyone with a press?
« Reply #5 on: 03/ 2/10 - 11:40PM »
Guess I should clarify, I need a 20 ton press. Tried it with a 12 ton tonight and it didn't get them all the way in.

Offline LoneWolf

  • Level 5
  • *****
  • Posts: 2557
Re: Anyone with a press?
« Reply #6 on: 03/ 3/10 - 01:15AM »
take it out to Phils or 4WS can't imagine either one of them charging much at all to press it for you.
EVERY NORMAL MAN MUST BE TEMPTED AT TIMES TO SPIT ON HIS HANDS, HOIST THE BLACK FLAG, AND BEGIN SLITTING THROATS.