« previous next »
Pages: [1] |   Go Down

Author Topic: dana 300 flip  (Read 1440 times)

Offline speediemb

  • Level 1
  • *
  • Posts: 10
dana 300 flip
« on: 03/21/10 - 11:57AM »
i just got a 258 with a 999 auto transmission and a dana 300 transfer case for my 87 wrangler. didnt relize the drop on transfer case was on wrong side till i came home to install. also i will need a longer drive shaft apx. 4 inches or more. any advise from some one who has done this. or any inexpensive kit i can buy.  :104:
Logged

Offline xj42

  • Level 3
  • ***
  • Posts: 293
Re: dana 300 flip
« Reply #1 on: 03/21/10 - 01:20PM »
There a couple thing you can do, depending on your budget.
Here are just the shifters.  You may of may not have to modify your floor.
http://www.pirate4x4.com/forum/showthread.php?t=505924&highlight=flip+sticks

You can buy these cable shifters.  The reverse shifters.
http://www.northwestfab.com/Shifters.html

You can buy this kit from DEO.
http://www.downeastoffroad.com/miva/merchant.mvc?Screen=PROD&Store_Code=DEO&Product_Code=DANA300FLIPKITTJ&Category_Code=TC

The most expensive option is going to be this RAC.
http://www.stak4x4.com/Dana_300/replace-a-case.htm

You could also make your own cable shifters, probably the most economical.  Search around on Pirate a little and you can find several people that have done this.  Here is a link to get you going on the cables.
http://www.midwestcontrol.com/push-pull-cables.php
Logged

Offline YJ_Aaron

  • Level 5
  • *****
  • Posts: 4255
  • Jeep @ Disney
Re: dana 300 flip
« Reply #2 on: 03/21/10 - 06:21PM »
You could leave pass drop, and just put in better axles.
Logged
Is it possible for a jeep to ever truely be finished?<br /><br />Only the dead have seen the end of war---Plato

Offline xj42

  • Level 3
  • ***
  • Posts: 293
Re: dana 300 flip
« Reply #3 on: 03/21/10 - 06:25PM »
Quote from: YJ_Aaron on 03/21/10 - 06:21PM
You could leave pass drop, and just put in better axles.

You could do that too.
I have a couple passenger drop 44's I'm looking to unload.
Logged

Offline speediemb

  • Level 1
  • *
  • Posts: 10
Re: dana 300 flip
« Reply #4 on: 03/21/10 - 10:38PM »
how much fo the 44 axle.. thnx
Logged

Offline speediemb

  • Level 1
  • *
  • Posts: 10
Re: dana 300 flip
« Reply #5 on: 03/21/10 - 10:39PM »
Quote from: xj42 on 03/21/10 - 01:20PM
There a couple thing you can do, depending on your budget.
Here are just the shifters.  You may of may not have to modify your floor.
http://www.pirate4x4.com/forum/showthread.php?t=505924&highlight=flip+sticks

You can buy these cable shifters.  The reverse shifters.
http://www.northwestfab.com/Shifters.html

You can buy this kit from DEO.
http://www.downeastoffroad.com/miva/merchant.mvc?Screen=PROD&Store_Code=DEO&Product_Code=DANA300FLIPKITTJ&Category_Code=TC

The most expensive option is going to be this RAC.
http://www.stak4x4.com/Dana_300/replace-a-case.htm

You could also make your own cable shifters, probably the most economical.  Search around on Pirate a little and you can find several people that have done this.  Here is a link to get you going on the cables.
http://www.midwestcontrol.com/push-pull-cables.ph

thank you for all the help so quickly - thanks guys
Logged

Offline xj42

  • Level 3
  • ***
  • Posts: 293
Re: dana 300 flip
« Reply #6 on: 03/21/10 - 11:37PM »
Logged
Pages: [1] |   Go Up
« previous next »