« previous next »
Pages: [1] |   Go Down

Author Topic: XJ QUESTION  (Read 1780 times)

Offline 4wheelin

  • Level 2
  • **
  • Posts: 108
XJ QUESTION
« on: 02/20/08 - 03:32PM »
I AM PUTTING A LIFT ON MY BROTHR'S 95 XJ THIS WEEKEND AND I WAS WONDERING WHAT SIZE TIRES EVERYONE ELSE IS FITTING UNDER THEIR XJ'S.

WE ARE DOING A ROUCH COUNTRY 3INCH LIFT WITH LOWER CONTROL ARMS AND SWAY BAR BRACKETS.
SOME OF THE BOOKS SAY YOU CAN ONLY GET 31X10.5 R15 UNDER IT WITH 3 INCH LIFT.

THANKS FOR THE ANY INFORMATION!
Logged

Offline LibertyPatriot

  • I vote for BACON!
  • Charter Members
  • Level 5
  • *
  • Posts: 1766
  • Web Wheeler!
Re: XJ QUESTION
« Reply #1 on: 02/20/08 - 03:51PM »
I had 32-10.50's under my 89 XJ with about the same lift.  You may need to adjust the steering stops and pound back some fender well material, but it should work.  The 31's they suggest is for absolutely no rubbing.

Have fun and start shooting the PB Blaster now if you haven't already...
Logged
I'd put something funny here, but you probably wouldn't get it anyway...

Offline 4wheelin

  • Level 2
  • **
  • Posts: 108
Re: XJ QUESTION
« Reply #2 on: 02/20/08 - 03:59PM »
WE HAVE BEEN SPRAYING THE PB BLASTER FOR ABOUT TWO WEEKS NOW.
WE ARE PUTTING A SET OF 32'S ON IT FOR NOW, WE WOULD LIKE TO GET 33'S BEFORE TWO LONG.
Logged

Offline YJ_Aaron

  • Level 5
  • *****
  • Posts: 4255
  • Jeep @ Disney
Re: XJ QUESTION
« Reply #3 on: 02/20/08 - 04:15PM »
Nick your dad said Sat. what time? 
Logged
Is it possible for a jeep to ever truely be finished?<br /><br />Only the dead have seen the end of war---Plato

Offline 4wheelin

  • Level 2
  • **
  • Posts: 108
Re: XJ QUESTION
« Reply #4 on: 02/20/08 - 04:33PM »
I WOULD LIKE TO START AT 10:00 AM. I'M GOING TO START FRIDAY NIGHT FOR A FEW HOURS TO GET A HEAD START. THIS THINGS IS COVERED IN MUD AND OIL UNDERNEATH. LOOKS LIKE ALOT OF FUN!
Logged

Offline YJ_Aaron

  • Level 5
  • *****
  • Posts: 4255
  • Jeep @ Disney
Re: XJ QUESTION
« Reply #5 on: 02/20/08 - 05:24PM »
CARWASH.... and PB Blaster.  I'll be over there at 10am on sat.  I think I remember how to get there.  Who are the other participants this time?
Logged
Is it possible for a jeep to ever truely be finished?<br /><br />Only the dead have seen the end of war---Plato

Offline OJTV8CJ

  • Charter Members
  • Level 4
  • *
  • Posts: 843
Re: XJ QUESTION
« Reply #6 on: 02/21/08 - 01:08PM »
Quote from: 4wheelin on 02/20/08 - 03:32PM
I AM PUTTING A LIFT ON MY BROTHR'S 95 XJ THIS WEEKEND AND I WAS WONDERING WHAT SIZE TIRES EVERYONE ELSE IS FITTING UNDER THEIR XJ'S.

WE ARE DOING A ROUCH COUNTRY 3INCH LIFT WITH LOWER CONTROL ARMS AND SWAY BAR BRACKETS.
SOME OF THE BOOKS SAY YOU CAN ONLY GET 31X10.5 R15 UNDER IT WITH 3 INCH LIFT.

THANKS FOR THE ANY INFORMATION!

33's but you have to committ to cutting it up.  LOL  I might come by but somebody left their Jeep in my garage and I need to work on it too.
Logged
I cut sheetmetal for free.  It's fixing it that get's expensive.

Offline YJ_Aaron

  • Level 5
  • *****
  • Posts: 4255
  • Jeep @ Disney
Re: XJ QUESTION
« Reply #7 on: 02/21/08 - 01:09PM »
WOOHOO my jeep is finally indoors!  Also if cutting is an option I say heck with the lift lets jus sawzall to clear!  Not my XJ
Logged
Is it possible for a jeep to ever truely be finished?<br /><br />Only the dead have seen the end of war---Plato

Offline 4wheelin

  • Level 2
  • **
  • Posts: 108
Re: XJ QUESTION
« Reply #8 on: 02/21/08 - 01:10PM »
THANKS, THAT'S WHAT I WAS HOPING FOR. I LITTLE CUTTING NEVER HURT A OLD XJ
Logged

Offline OJTV8CJ

  • Charter Members
  • Level 4
  • *
  • Posts: 843
Re: XJ QUESTION
« Reply #9 on: 02/21/08 - 01:11PM »
You can't just cut holes!  (Then the groceries fall out!)  :o
Logged
I cut sheetmetal for free.  It's fixing it that get's expensive.

Offline 4wheelin

  • Level 2
  • **
  • Posts: 108
Re: XJ QUESTION
« Reply #10 on: 02/21/08 - 01:20PM »
Quote from: YJ_Aaron on 02/21/08 - 01:09PM
  Not my XJ
LIKE AARON SAID ITS NOT MINE!
JASON WILL HAVE TO DEAL WITH THE GROCERIES FALLING OUT.
Logged

Offline YJ_Aaron

  • Level 5
  • *****
  • Posts: 4255
  • Jeep @ Disney
Re: XJ QUESTION
« Reply #11 on: 02/25/08 - 11:34PM »
Well we lifted it and put 32's on it.  It looks good.  Not bad at all for a budget rig.
Logged
Is it possible for a jeep to ever truely be finished?<br /><br />Only the dead have seen the end of war---Plato
Pages: [1] |   Go Up
« previous next »