« previous next »
Pages: [1] |   Go Down

Author Topic: Lathe?  (Read 1085 times)

Offline LibertyPatriot

  • I vote for BACON!
  • Charter Members
  • Level 5
  • *
  • Posts: 1766
  • Web Wheeler!
Lathe?
« on: 04/ 1/08 - 02:44PM »
Does anyone work at a shop or have a lathe that can turn down some bolts to look like these?  I think the bolt is 1-1/8".  There is a narrow shank right at the bolt head, so I'll have to get them threaded down too.

Logged
I'd put something funny here, but you probably wouldn't get it anyway...

Offline OJTV8CJ

  • Charter Members
  • Level 4
  • *
  • Posts: 843
Re: Lathe?
« Reply #1 on: 04/ 1/08 - 03:09PM »
Yes
Logged
I cut sheetmetal for free.  It's fixing it that get's expensive.

Offline LibertyPatriot

  • I vote for BACON!
  • Charter Members
  • Level 5
  • *
  • Posts: 1766
  • Web Wheeler!
Re: Lathe?
« Reply #2 on: 04/ 1/08 - 05:33PM »
I got more info.  It's a 7/8" bolt turned down to 5/8".  Would also need a die to thread down within 1/16" of the bolt head.  Thread is 14 TPI.  Bolt length is 2-1/4".
Logged
I'd put something funny here, but you probably wouldn't get it anyway...

Offline LoneWolf

  • Level 5
  • *****
  • Posts: 2557
Re: Lathe?
« Reply #3 on: 04/ 8/08 - 10:37AM »
yes
Logged
EVERY NORMAL MAN MUST BE TEMPTED AT TIMES TO SPIT ON HIS HANDS, HOIST THE BLACK FLAG, AND BEGIN SLITTING THROATS.
Pages: [1] |   Go Up
« previous next »